구 분 |
사 양 |
Display |
5.7” Mono Touch Type |
Control Mode |
2Channel Control(Temp 1Ch, Humid 1CH) |
Max Channel |
- |
Pattern & Segment |
120Pattern / Max 1200 segments |
Input |
Temp |
PT1 100Ω |
- 90.00 ~ 200.00℃ |
PT2 100Ω |
- 100.0 ~ 300.0℃ |
DC voltage |
- 1.000 ~ 2.000V |
Humid |
PT1 100Ω |
- 10.0 ~ 110.0℃ |
DC voltage |
1.000~5.000V |
Output |
Control Output |
2 Points(Temp, Humid) |
Current Output |
4~20mA DC(Load resistance : Max 600Ω) |
Voltage Output |
15V DC(Pulse width : Minimum 5ms) |
Transmission Output |
2points(Temp,Humid), Type : PV, SP, MV |
Digital Input |
Contact Type |
DI 8 Points / Fixed Run,Stop by DI, possible change Error massage |
Contact capacity |
Max 12V DC, 10mA |
Digital Output |
Relay |
Normal Open 30V DC 5A, 250V AC 5A Normal Close 30V DC 1A 250V AC 2A |
Open Collector |
ON voltage across contacts at less than 2V, the leakage current less than 100 ㎂ |
Sampling Time |
250ms |
Accuracy |
Temp(±0.1% ±1 digit of Full Scale), Humid(±1% ±1 digit of Full Scale) |
PID Control |
PID group |
9 group(Temp, Humid PID 6 group + Only Temp PID 3 group) |
PID type |
ZONE PID |
Communication |
Interface |
Select RS485/RS232C, Max 99 node |
Protocol |
PC Link, MODBUS(RTU,ASCII) |
Speed |
Max 9,600 bps |
Data Back-Up |
Object |
UDC300(Option) : Save UDC300 own memory(32M)
or Use USB memory stick |
Functions |
Program info & SP back-up & restore, Save Temp, Humid indications |
Power Supply |
Power |
100 ~ 240V AC(±10%), 50/60Hz |
Power Consumption |
Max 20W / 500V DC 20MΩ |
Operating environment
|
- |
Weight |
- |
|
|
|
|
|