구 분 |
사 양 |
Display |
5.7” Color Touch Type |
Control Mode |
1CH Control(Temp 1CH) |
Max Channel |
- |
Pattern & Segment |
120Pattern / Max 1200 segments |
Input |
TC |
K, J, E, T, R, B, S, L, N, U, W, Platinel II |
RTD |
Pt100Ω, JPt 100Ω |
Analog Voltage Input |
0.4~2V DC, 1~5V DC, 0~10V DC, -10~20 mV DC, 0~100 mV DC, 4~20 mA , 0~20 mA |
Output |
Control Output |
2 Points(Heat, Cool) |
Current Output |
4~20mA DC(Load resistance : Max 600Ω) |
Voltage Output |
15V DC(Pulse width : Minimum 5ms) |
Transmission Output |
1point, Type: PV, SP, MV, HMV, CMV |
Digital Input |
Contact Type |
DI 16 Points / Fixed Run,Stop by DI, possible change Error massage , Select Pattern 1~16 |
Contact capacity |
Max 12V DC, 10mA |
Digital Output |
Relay |
Normal Open 30V DC 5A, 250V AC 5A Normal Close 30V DC 1A 250V AC 2A |
Open Collector |
ON voltage across contacts at less than 2V, the leakage current less than 100 ㎂ |
Sampling Time |
250ms |
Accuracy |
±0.1% of FS ±1 digit |
PID Control |
PID group |
4group(Zone PID 3group + Dev PID 1group) |
PID type |
Zone PID, Dev PID |
Communication |
Interface |
Select RS485/RS232C, Max 99 node |
Protocol |
PC Link, Sync Master, MODBUS RTU, MODBUS ASCII |
Speed |
Max 9,600 bps |
Data Back-Up |
Object |
UDC300(Option) : Save UDC300 own memory(32M)
or Use USB memory stick |
Functions |
Program info & SP back-up & restore, Save Temp, Humid indications |
Power Supply |
Power |
100 ~ 240V AC(±10%), 50/60Hz |
Power Consumption |
Max 20W / 500V DC 20MΩ |
Operating environment |
- |
Weight |
- | |